Description
Description (EN): The aim of the project is to strengthen cross-border R & I activities. This will be achieved through joint research and development of a screw motor (SM). The project involves close cooperation with knowledge transfer between the research institutions in the BY-CZ border area. The strengths of the respective research institutions and their infrastructure are used in a targeted manner. Close cooperation between the research teams is necessary, as the Bavarian partner has better technical equipment, the Czech partner has more theoretical experience in the design of the machines under consideration. The development of the SM takes place through theoretical approaches and calculations. These are calibrated by experiments or their result verified by measurements. The majority of the calculations are carried out by ZČU Pilsen, the practical activities are mainly carried out at OTH Amberg. The close cooperation between the two teams is essential for the success of the project. The target group consists of 3 research institutions, 2 public institutions and a private enterprise. All three institutions work in the field of energy technology and deal with energy efficiency and process optimisation. The project will involve 3 research staff on the German side and 11 on the Czech side (mostly part-time jobs). The organisation is handled by an overall project manager, a financial officer and one technical manager each. The main objective of the project is the development of a screw motor. The ORC (Organic Rankine Cycle) process is intended to use the previously unused waste heat from industrial processes or the combustion heat of renewable raw materials. The mechanical work supplied by the SM can be used for power generation or as a drive for working machines. The use of waste heat improves the energy efficiency of the respective overall process and relieves the environment. An output of the project is an efficient, smooth, cost-effective and simpler unit in construction than the turbines used to date in this field. With outputs up to
1.5 MW, displacement machines have an efficiency advantage over turbines.The exchange of information between the institutions will take place in 12 workshops, which take place alternately in Amberg and Pilsen. The added value of the project is mainly the improvement of the technical equipment of the partners’ laboratories, the transfer of knowledge between the jobs in the CZ-BY border area, the increase in linguistic competence and the deepening of cross-border cooperation. In the assisted area there are at least 18 companies that may be interested in the project results for the SM in order to increase their competitiveness. The number of companies whose waste heat would be usable with a functioning screw motor far exceeds them.
Read more Description (CS): Cílem projektu je posílení přeshraničních aktivit v oblasti výzkumu a inovací. Toho bude dosaženo společným výzkumem a vývojem inovativního šroubového motoru. V rámci projektu dojde k úzké spolupráci a propojení výzkumných institucí mezi partnery v česko-bavorském přeshraničí, přičemž bude využita specializace výzkumných pracovišť, které se vzájemně doplňují. Výzkumné týmy musí navázat úzkou spolupráci, poněvadž německý partner sice disponuje lepším přístrojovým vybavením, ale čeští partneři mají širší zkušenosti s vývojem a výpočty podobných zařízení. Vývoj šroubového motoru bude uskutečněn na základě teoretických úvah a pomocí výpočtů, které budou podpořeny experimenty. Výsledky měření poslouží k nastavení okrajových podmínek numerických výpočtů a naopak výsledky výpočtů budou verifikovány měřením. Další výpočty se pokusí zobrazit termodynamické procesy v zařízení, experimenty ověří jejich kvalitu a funkčnost celého procesu. Výpočty budou většinou uskutečněny na ZČU Plzeň a praktické činnosti většinou na OTH Amberg/Weiden. Z toho je patrné, že spolupráce obou týmů je nezbytná.
Cílovou skupinu tvoří tři výzkumné organizace, z toho dvě veřejnoprávní a jedna soukromá, jež se zabývají činností v oblasti energetiky a s tím souvisejícími úsporami energií a optimalizací procesů. Řešením projektu se budou zabývat 3 výzkumní pracovníci na německé straně a 11 výzkumných pracovníků na české straně (jde o částečné úvazky). Organizační zázemí vědeckých týmů budou zajišťovat hlavní manažer projektu, finanční a věcný manažer a to na každé straně.
Hlavní náplní projektu je vývoj šroubového motoru. Motor bude poháněn odpadním teplem z průmyslového provozu, teplem ze spalování nebo z obnovitelých zdrojů energie díky využití ORC (Organic Rankine Cycle). Mechanická práce dodaná šroubový motorem bude přeměněna na elektrickou energii nebo bude využita k pohonu strojů. . Díky využití této energie bude snížena celková energetická náročnost procesu a přispěje se tím k ochraně přírody.
Výstupem projektu bude energetická jednotka, která je konstrukčně jednodušší, levnější, vibračně klidnější a z hlediska účinnosti do mechanického výkonu až 1,5MW lepší než lopatkové turbíny. Zavedení šroubového motoru bude mít významný vliv na životní prostředí. Výměna zkušeností mezi zúčastněnými institucemi proběhne na 12 workshopech, střídavě v Ambergu a v Plzni.
Přidaná hodnota projektu je především ve zvýšení technické vybavenosti laboratoří zúčastněných partnerů, ve zvýšení přenosu informací mezi pracovišti v česko-bavorském přeshraničí, zvýšení jazykových kompetencí a v prohloubení přeshraniční spolupráce. Předpokládáme velký zájem firem z dotačního území o výsledky projektu a zvýšení jejich konkurenceschopnosti. V dotačním území je 18 podniků, které by mohly mít zájem o výsledky projektu. Počet podniků, které by využily odpadní teplo pomocí funkčního šroubového motoru ale toto číslo výrazně převyšuje.
Read more Description (DE): Das Ziel des Projekts ist die Stärkung grenzübergreifender F&I-Aktivitäten. Dies soll durch gemeinsame Erforschung und Entwicklung eines Schraubenmotors (SM) erzielt werden. Im Rahmen des Projekts erfolgt eine enge Zusammenarbeit mit Wissenstransfer zwischen den Forschungsinstitutionen im BY-CZ Grenzgebiet. Hierbei werden die Stärken der jeweiligen Forschungseinrichtungen und deren Infrastruktur zielgerichtet genutzt. Eine enge Kooperation der Forschungsteams ist erforderlich, da der bayerische Partner über eine bessere technische Ausstattung, der tschechischen Partner über mehr theoretische Erfahrung in der Auslegung der betrachteten Maschinen verfügt. Die Entwicklung des SM erfolgt über theoretische Ansätze und Berechnungen. Diese werden durch Experimente kalibriert bzw. deren Ergebnis durch Messungen verifiziert. Der Großteil der Berechnungen werden von der ZČU Pilsen durchgeführt, die praktischen Tätigkeiten erfolgen im Wesentlichen an der OTH Amberg. Die enge Zusammenarbeit der beiden Teams ist für den Erfolg des Projekts zwingend erforderlich. Die Zielgruppe bilden 3 Forschungsinstitutionen, 2 öffentliche Einrichtungen und ein privatwirtschaftliches Unternehmen. Alle drei Institutionen arbeiten im Bereich der Energietechnik und beschäftigen sich mit Energieeffizienz und Prozessoptimierung. Am Projekt werden sich 3 Forschungsmitarbeiter auf deutscher Seite und 11 auf tschechischer Seite beteiligen (meist Teilzeitstellen). Um die Organisation kümmern sich ein Gesamtprojektleiter, ein Finanzbeauftragter und je ein fachlicher Leiter. Das Hauptziel des Projekts ist die Entwicklung eines Schraubenmotors. Dieser soll mittels ORC-Prozess (Organic Rankine Cycle) die bisher nicht genutzte Abwärme industrieller Prozesse oder die Verbrennungswärme nachwachsender Rohstoffe nutzen. Die vom SM gelieferte mechanische Arbeit kann zur Stromerzeugung oder als Antrieb für Arbeitsmaschinen genutzt werden. Die Nutzung von Abwärme verbessert die Energieeffizienz der jeweiligen Gesamtprozesses und entlastet die Umwelt. Ein Output des Projekts ist eine effiziente, laufruhig, kostengünstige und in der Konstruktion einfachere Einheit als die bisher in diesem Bereich benutzten Turbinen. Bei Leistungen bis 1,5 MW haben Verdrängermaschinen einen Effizienzvorteil gegenüber Turbinen. Der Informationsaustausch zwischen den Institutionen wird in 12 Workshops erfolgen, die abwechselnd in Amberg und Pilsen stattfinden. Der Mehrwert des Projekts besteht vor allem in der Verbesserung der technischen Ausstattung der Labore der Partner, im Wissenstransfer zwischen den Arbeitsstellen im CZ-BY Grenzgebiet, in der Steigerung sprachlicher Kompetenz und in der Vertiefung der grenzüberschreitenden Zusammenarbeit. Im Fördergebiet gibt es min. 18 Unternehmen, die an den Projektergebnissen zum SM interessiert sein könnten, um ihre Wettbewerbsfähigkeit zu steigern. Die Anzahl der Unternehmen deren Abwärme mit einem funktionierenden Schraubenmotor nutzbar wäre übersteigt diese bei Weitem.
Read more
Website: http://www.by-cz.eu
Expected Results (CS): Situace MSP v oblasti výzkumu a inovací z pohledu výměny znalostí
Expected Results (DE): Situation von KMU im F&I-Bereich in Bezug auf den Wissensaustausch
Expected Outputs (CS): Hlavními výsledky projektu jsou:
– Pořízení infrastruktury ve formě nástrojů a přístrojů
– Výměna zkušeností mezi pracovníky zúčastněných institucí na workshopech
(Bude jich celkem 12 za dobu řešeného projektu, budou jednodenní pro cca 14 účastníků, v Ambergu a v Plzni.)
– 3 výzkumné zprávy
– 4 příspěvky pro vědecké konference
– 3 články do odborných časopisů
– 3 bakalářské a diplomové práce
– 2 disertační práce
– 2 funkční vzorky šroubového motoru tj. stend pro ORC a šroubový motor.
Indikátorem výsledku programu je zapojení MSP do výzkumu a inovací. Kromě řešitelů oslovíme i další MSP v česko-bavorském příhraničí a budeme je zvát na pravidelné workshopy a sdílet s nimi informace. Na realizaci aktivit se budou aktivně podílet všichni partneři přibližně ve stejném poměru.
Read more Expected Outputs (DE): Die Hauptergebnisse des Projekts sind:
- Schaffen der Infrastruktur – Beschaffung von Geräten und Maschinen
- Informationsaustausch zwischen den Mitarbeitern während der Workshops (insgesamt 12 während des Projekts, 1 Tag für ca. 14 Mitarbeiter, in Amberg und in Pilsen)
- 3 Forschungsberichte
- 4 Beiträge für Fachkonferenzen
- 3 Artikel für die Fachzeitschriften
- 3 Bachelor- und Masterarbeiten
- 2 Dissertationen
- 2 funktionsfähige Muster des Schraubenmotors und ein ORC-Prüfstand.
Ein Ergebnisindikator des Programmes ist die Einbeziehung der KMU in die Forschung und Innovationen. Außer den Beteiligten sprechen wir weitere KMU im BY-CZ Grenzgebiet an und werden sie regelmäßig zu Workshops einladen und Informationen mit ihnen teilen. Am Projekt werden sich aktiv alle Partner im ungefähr gleichen Umfang beteiligen.
Read more
Thematic information
Specific Objective:
Improved involvement of SMEs in research and innovation
Thematic Objective:
(01) strengthening research, technological development and innovation by:
Investment Priority:
(01b) promoting business investment in R&I, developing links and synergies between enterprises, research and development centres and the higher education sector, in particular promoting investment in product and service development, technology transfer, social innovation, eco-innovation, public service applications, demand stimulation, networking, clusters and open innovation through smart specialisation, and supporting technological and applied research, pilot lines, early product validation actions, advanced manufacturing capabilities and first production, in particular in key enabling technologies and diffusion of general purpose technologies
Read more
Partners (3)
Lead Partner:
Západočeská univerzita v Plzni
Address:
306 14 Plzeň, Czech Republic
Legal status:
public
Website:
http://www.zcu.cz
Total budget:
EUR 435 887.35
ERDF budget:
EUR 370 504.25
-
ATMOS vývoj s.r.o.
-
Name:
ATMOS vývoj s.r.o.
Address:
33003 Chrást, Czech Republic
Legal status:
private
Website:
http://www.atmos-vyvoj.cz
Total budget:
EUR 166 980.55
ERDF budget:
EUR 125 235.41
-
Ostbayerische Technische Hochschule Amberg-Weiden
-
Name:
Ostbayerische Technische Hochschule Amberg-Weiden
Address:
D-92224 Amberg, Germany
Legal status:
public
Website:
http://www.oth-aw.de
Total budget:
EUR 422 185.00
ERDF budget:
EUR 358 857.25